$6.99
$60.50
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
Goal:
Take apart and put together.
$16.99
This puzzle contains 3 un-identical pieces.
Try to assemble the pieces to a 3D puzzle.
Sold Out
The puzzle contains 4 pieces : 2 triangles and 2 trapezoids.
One frame is larger than the other. The larger frame is used to store the pieces.
Turn it over
Notice that this side is smaller and the frame is thicker.
Now, try to fit the 4 pieces in the frame.
* Do not use strength.
If you solve it correctly, the pieces will slide in to place smoothly.
Good Luck
Sold Out
This puzzle contains 6 non identical pieces.
Try to assemble the pieces to 3D burr puzzle.
Sold Out
Puzzle design by Vin&Co from Czech Republic., designer Vaclav Obsivac.
A strict definition of a half-cube is one part of the dissection of a cube into two identical parts. Both parts have the same shape and volume. The dissection may be a single cut along a orthogonal or a diagonal reflection plane or a more elaborate combination of cuts resulting even in half-cubes separating along one axis only. Puzzles made from half-cubes separating in many directions are in general assembly- or box-filling puzzles; but puzzles from half-cubes separating along one axis only are interlocking. We can broaden this definition by allowing cube dissections producing mirror images as half-cubes as well. Designing puzzles on the basis of half-cubes involves changing them so mutants are created that no longer have the volume of half the cube. The definition of a pair of “mutant half-cubes” is any dissection of a cube in two pieces. Here both shape and volume may be different, the only condition is that the two pieces combine into a cube. This definition allows many different pairs of mutant half-cubes.
$19.99
$63.50
Puzzle design by Vin&Co from Czech Republic., designer Vaclav Obsivac.
Goal:
Take 6 pieces apart and put them together.
Level of Difficulty 4.
Sold Out
Sold Out
In this special box you can find 27 wooden rods.
All of them have the same size, but are sliced differently inside.
To create a burr puzzle (interlock puzzle that has 2 rods on each side), you will need any 5 different rods + the 0 (zero) rod- which is the only fully squared rod.
Sold Out
A classic game that has been teasing puzzlers for generations, can you eliminate the redundant sides?
Three puzzles in one:
1. Take the cubes out from the case, mix them up, and then rearrange them (in the case) so there are four different colors on each side.
2. Arrange the cubes out from the case in a 2X2 square, so there are four different colors on the top, the same four different colors on the bottom and two different colors on each side.
3. Arrange the cubes out from the case in a 2X2 square, so there are four different colors on the top, the same four different colors on the bottom and two of the same color on each side.
Sold Out
A classic game that has been teasing puzzlers for generations, can you eliminate the redundant sides?
Three puzzles in one:
1. Take the cubes out from the case, mix them up, and then rearrange them (in the case) so there are four different colors on each side.
2. Arrange the cubes out from the case in a 2X2 square, so there are four different colors on the top, the same four different colors on the bottom and two different colors on each side.
3. Arrange the cubes out from the case in a 2X2 square, so there are four different colors on the top, the same four different colors on the bottom and two of the same color on each side.
Sold Out
Keychain Crystal - Wooden Puzzle
Disassemble and assemble pack the pieces all together!
You can play with it everywhere!
Sold Out
Crystal Wooden Interlocking Puzzle
Don't let the perfectly symmetrical, beautiful crystal design fool you- building this puzzle is much harder than taking it apart.
This puzzle contains 19 non-identical bars. Once the lock piece is removed the crystal will begin to disassemble.
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
A strict definition of a half-cube is one part of the dissection of a cube into two identical parts. Both parts have the same shape and volume. The dissection may be a single cut along a orthogonal or a diagonal reflection plane or a more elaborate combination of cuts resulting even in half-cubes separating along one axis only. Puzzles made from half-cubes separating in many directions are in general assembly- or box-filling puzzles; but puzzles from half-cubes separating along one axis only are interlocking. We can broaden this definition by allowing cube dissections producing mirror images as half-cubes as well. Designing puzzles on the basis of half-cubes involves changing them so mutants are created that no longer have the volume of half the cube. The definition of a pair of “mutant half-cubes” is any dissection of a cube in two pieces. Here both shape and volume may be different, the only condition is that the two pieces combine into a cube. This definition allows many different pairs of mutant half-cubes.
$32.50
Puzzle design by Vin&Co from Czech Republic., designer Vaclav Obsivac.
The goal is to put all the pieces inside the wooden box. The puzzles is made from various wood (for example cherry, maple, walnut, ash, oak, acacia, elm, plum).
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
A strict definition of a half-cube is one part of the dissection of a cube into two identical parts. Both parts have the same shape and volume. The dissection may be a single cut along a orthogonal or a diagonal reflection plane or a more elaborate combination of cuts resulting even in half-cubes separating along one axis only. Puzzles made from half-cubes separating in many directions are in general assembly- or box-filling puzzles; but puzzles from half-cubes separating along one axis only are interlocking. We can broaden this definition by allowing cube dissections producing mirror images as half-cubes as well. Designing puzzles on the basis of half-cubes involves changing them so mutants are created that no longer have the volume of half the cube. The definition of a pair of “mutant half-cubes” is any dissection of a cube in two pieces. Here both shape and volume may be different, the only condition is that the two pieces combine into a cube. This definition allows many different pairs of mutant half-cubes.
Sold Out
$39.99
Solitaire was invented in the 17th century by a French noble imprisoned in the Bastille. Game boards have been found all over the world in the last 300 years with little improvement on the original design.
Solitaire is a game that is traditionally played on a wooden board. At the beginning of the game the ball in the center of the board is removed. Moves are made by jumping a ball over an adjacent ball, removing each ball as you pass over it. The aim of the game is to remove all the balls until only one ball is left in the center of the board.
Sold Out
With 3 different objectives this is the perfect game for any coffee table. See how many solutions you can find for the triangle and the two three dimensional pyramids.
The triangle can be filled any of 24 ways, and once complete the pieces can be used to make a 4x4x4 pyramid using 20 balls and a 5x5x5 using all the pieces except the single ball.
Sold Out
The Tangram is a dissection puzzle consisting of seven flat shapes, called tans, which are put together to form shapes.
The objective of the puzzle is to form a specific shape (given only an outline Select one card out of 42 and build the shape, using all parts of the tangram.
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
Sold Out
$28.99
This dynamic cube is one of our hardest, and also happens to be one of our favorites. The Koncy Puzzle contains six pieces. Nothing connects these pieces to each other, or lets the cube retain its form, besides the unique and unconventional shapes of the pieces themselves. Dismantling this cube is a very complex and gentle affair. It should be done one step at a time, and is difficult in and of itself.
The 6 pieces slide apart and return to a cube. It is important to note the last piece to come apart as it is the last to be inserted as the cube is reassembled.
$22.99
$19.99
This clever puzzle has an elegant solution, and makes a wonderful gift for any visual thinker!
Inside a wooden frame are 7 cylindrical pieces, of different lengths. In the side of the frame is an indentation containing an additional piece. Rearrange all 8 pieces so that they lie flat inside the frame.
A real stumper!
You can find solution here:
https://cdn.shopify.com/videos/c/o/v/f4551c240fd7438483c9bad90e152f46.mov
Sold Out
Sold Out
The fabulous magic box, with the right grip the drawer slides right out.
The object is to try and open the magic box.
Perfect to put GIFT CARDS, MONEY, JEWELRY, anything you can think about!
Sold Out
2 brain-Teasers for one player.
The puzzle is made up of a box and 16 wooden squares.
Game 1:
Arrange the squares in a way that the sum of the numbers in any direction (horizontal, vertical or diagonal) will be 34 (there are several solutions).
Too difficult? Take a hint from the included solution.
Game 2:
Sold Out
The challenge :Balance all the nails on the single peg in the center without letting the nails touch the base!
You may not use rubber band, glue or any other aids…
Sold Out
$24.50
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
Make a cube from 4 pieces. Pieces are in paper box in non solution form.
$40.99
This game is based on Pentominoes series (5 squares), designed in a 3D format to create 17 different shapes any 16 of which can be used to solve the puzzle.
Chose one piece from the 17 pieces available. Place the chosen piece in the slot meant for a single piece. Try to assemble a 2 deep rectangle (size 8x5x2) from the other remaining 16 pieces. Note: In addition to the 17 different combinations, each option contains more than one solution (up to dozens for each option.)
Sold Out
Puzzle design by Vin&Co from Czech Republic., designer Vaclav Obsivac.
A strict definition of a half-cube is one part of the dissection of a cube into two identical parts. Both parts have the same shape and volume. The dissection may be a single cut along a orthogonal or a diagonal reflection plane or a more elaborate combination of cuts resulting even in half-cubes separating along one axis only. Puzzles made from half-cubes separating in many directions are in general assembly- or box-filling puzzles; but puzzles from half-cubes separating along one axis only are interlocking. We can broaden this definition by allowing cube dissections producing mirror images as half-cubes as well. Designing puzzles on the basis of half-cubes involves changing them so mutants are created that no longer have the volume of half the cube. The definition of a pair of “mutant half-cubes” is any dissection of a cube in two pieces. Here both shape and volume may be different, the only condition is that the two pieces combine into a cube. This definition allows many different pairs of mutant half-cubes.
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
The goal is to put all the pieces inside the wooden tray. The puzzles is made from various wood (for example cherry, maple , walnut, ash, oak, acacia, elm, plum).
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
Sold Out
Once the shape is unraveled, getting it back into a cube turns out to be much harder than it looks.
A 3 x 3 x 3 cube made up of 27 pieces linked together by a stretchy string.
Sold Out
Once the shape is unraveled, getting it back into a cube turns out to be much harder than it looks.
A 3 x 3 x 3 cube made up of 27 pieces linked together by a stretchy string.
Sold Out
Once the shape is unraveled, getting it back into a cube turns out to be much harder than it looks . Fair warning: this puzzle has 47 steps to bring it back into a cube. Starting with a 3x cube is recommended.
Sold Out
This is a super fun and intriguing, handcrafted wooden version of a puzzle that is typically seen made out of plastic.
Object: Get all 3 marbles to the center core of the maze. At the end of the games the three balls must stay together at the center.
Skill and dexterity will be required!
Sold Out
Puzzle design by Vin&Co from Czech Republic, designer Vaclav Obsivac.
The goal is to put all the pieces inside the wooden tray. The puzzles is made from various wood (for example cherry, maple , walnut, ash, oak, acacia, elm, plum).
Sold Out
This is a good starting point for 3d puzzles, a fun puzzle that leaves you with a nice decoration for any desk or mantle. It is important to pay attention to how the star comes apart in order to put it back together again.
This puzzle contains 6 identical pieces. Try to assemble the pieces to a 3D star shape.
Sold Out
This is a good starting point for 3d puzzles, a fun puzzle that leaves you with a nice decoration for any desk or mantle. It is important to pay attention to how the star comes apart in order to put it back together again.
This puzzle contains 6 identical pieces. Try to assemble the pieces to a 3D star shape.
Sold Out
Puzzle design by Vin&Co from Czech Republic., designer Vaclav Obsivac.
Goal:
Place all the pieces inside the box.
Sold Out
Sold Out
Sold Out
This is a single player puzzle with difficulty level 1, 2, 3, 4, 5. To start the game – Take all the pieces out, put the castle guard ( the stick) in one of the holes. Now build the castle using all the pieces one next to the other. This puzzle has 13 options. Put the guard in a another hole and build the castle again. |
Sold Out